6700i Horizontal Sliding

  • Exterior View, Insulated Glass

  • Interior View, Insulated Glass

  • Exterior View, Dual Glazed

  • Interior View, Dual Glazed

  • Exterior View, Dual Glazed with Blinds

  • Interior View, Dual Glazed with Blinds

  • Exterior View, Insulated Glass with Exterior Applied Muntins

  • Interior View, Insulated Glass with Exterior Applied Muntins

  • Exterior View, Insulated Glass with Internal Muntins

  • Interior View, Insulated Glass with Internal Muntins

  • Exterior View, Insulated Glass with Sash Lock

  • Interior View, Insulated Glass with Sash Lock

  • Exterior View, Insulated Glass with Open Sash

  • Interior View, Insulated Glass with Open Sash

    Features & Information
  • Standard Features
    • Large multi-cavity thermal strut design provides maximum thermal performance for remarkably low u-values and dual finish capability
    • Double slide configuration allows ventilation from either side and removal for cleaning by maintenance personnel (XX, XOX & OXO configurations available)
    • Adjustable high performance Delrin stainless steel ball bearing rollers provide smooth operation
    • Wet glazing with structural silicone delivers maximum seal strength and water resistance
    • Available with straight or beveled glazing legs for aesthetic design flexibility
  • Optional Features
    • Dual glazing with removable access panels (Allows for vandal resistant polycarbonate glazing or 5/8” deep integral blinds (straight leg only))
    • Bypassing sash for cleaning of all exterior glass from the interior without sash removal
    • Continuous jamb frame with integral top or bottom fixed transoms
    • True, exterior applied or between the lites of dual glazing muntin grids
    • 15 psf sill for increased water resistance
    • Full or half insect screens (fiberglass, aluminum or stainless-steel mesh)
    • Hurricane Windborne Debris Impact Resistance (Large Missile)
    • Limit devices for restricted opening (NYCDOH stamped where applicable)
  • Performance Charts
  • Downloadable Details, Data Sheet + Specification
We have you covered

Architects must balance longevity, cost, risk and beauty while controlling the effects of temperature, water, wind, acoustics and storm-driven projectiles. Architects collaborate best with manufacturers driven by an equal passion for balance and control.

Contact Us
Lets Get Started
Performance Data1
Series Operation AMAA
Rating 		Test Size
(inches) 		Air (cfm/ft2)
@ 6.24 psf 		Water
(psf) 		Design Pressure
(psf) 		Structural Overload
(psf) 		OITC U-Factor
(BTU/HR/FT2/F)
6700i Double Slide AW-PG70 99 x 79 0.20 12 (10,15) 70 105 Consult AWM See Thermal
  • 1 Based on independent certified laboratory testing per AAMA/WDMA/CSA 101/I.S.2/A440. Field results will vary based on size, test methods, accessories & conditions.
Thermal Performance Chart1
Window Size (Inches) CENTER OF INSULATED GLASS U-FACTOR/SPACER TYPE (“Alum.” = Aluminum, “Warm” = Warm Edge) 2
0.33/Alum. 0.33/Warm 0.29/Alum. 0.29/Warm 0.24/Alum. 0.24/Warm 0.20/Alum. 0.20/Warm
59 x 47* 0.496 0.462 0.473 0.436 0.445 0.407 0.408 0.375
72 x 48 0.481 0.450 0.457 0.424 0.427 0.393 0.389 0.360
  • 1Based on independent certified simulations in accordance with NFRC 100
  • 2Consult AWM for additional configurations
  • *Designates NFRC Gateway size
Thermal Performance Chart1
Window Size WHOLE WINDOW U-FACTOR USING ARGON FILLED SPUTTER COAT LOW-E #2 INSULATED GLASS WITH A WARM EDGE SPACER2 2
  • 1 Based on independent certified simulations in accordance with NFRC 100
  • 2 Consult AWM for additional configurations
  • * Designates NFRC Gateway size

Typical Details

Select which format you would like to download:

PDF CAD

Coming Soon

This content has not been uploaded yet, but is coming soon. If you have any questions about this product please feel free to contact us.

Contact Us

We can test our windows to AAMA ratings that are amongst the highest in the country. Our total manufacturing control gives you total creative control.

Ken Thompson

Vice President - Sales